This process is simple, but needs to be done before each time you ride.
If you've ever experienced the throttle control on the Nano-X being too sensitive, or your wheels are spinning with no input from the remote, forgetting this step is most likely the reason why.
1. Turn on the Nano-X - MAKE SURE IT IS IN R-SPEC MODE (rear switch toggled DOWN)
2. Push throttle full-forward, full back then leave center
3. Turn on the skateboard
4. Wait for green light on Nano-X to become solid (indicates connection)
5. Check Acc/Brake function before riding
That's it, you're done! Now get out there and RIDE!