So the brakes are a bit off for your riding style? No problem! The Raptor 2 is made to be fully modular and tuned to each rider. You will need to download the Raptor tool which can be found here. Once that is downloaded, just connect a micro USB cable to the Master focbox USB port (the one with the more wires plugged into it, hit connect on the application and adjust your brakes, acceleration, low end speed and even your top speed!.
Be sure to hit 'save' so all of your changes save to your Focbox. When you plug into one of your Focboxes, It automatically pushes that information to both Focboxes as long as you are connected to the 'Master' (The one with the USB cable coming out of it)
Step 1. Open/install the Raptor 2 tool which can be downloaded for free here (Raptor 2 Tool Links)
Step 2. Connect your Master FOCBOX ( the one that is connected to the receiver) via micro USB to your computer. Power the board on and click “connect” on the Raptor tool.
1) Make sure FOC tab is ticked
2) Entering your weight in KG and then hitting "set recommended" is the best way to tune your
board as the software knows the best settings for your weight
3) You should set your weight before adjusting these values to your liking. It will give you a solid starting point for tuning
4) Save before closing.
Step 4. Hit “Save configuration” at the bottom of the screen. Disconnect the USB from the Focbox. Turn the power off.